Dan’s Performance Parts is proud to offer Empi’s hydraulic single pedal assemblies! This single pedal assembly features a cast aluminum mounting base that is fitted with a high grade pedal shaft and hardware that will connect the jig built chrome plated pedal arm to the assembly. This aluminum base also provides a solid foundation for the master cylinder connection as well.
The master cylinders are made from an aluminum casting and are machined to exact tolerances to make these assemblies work under the most extreme conditions. This single pedal assembly will come with a 3/4″ bore master cylinder to operate most slave cylinders, calipers or wheel cylinders.
To finish off the master cylinder, Empi chrome plated them to give you that show quality look! The master cylinder will have a built-in deep wall reservoir, as well as a chrome plated lid with a screw-on easy fill cap for easy maintenance. For the hydraulic line connection, it will take a 1/8″ NPT fitting and is located at the end of the master cylinder.
The versatility of the single pedal assemblies allow them to either be floor mounted or hung from above by just simply rotating the master cylinder 180 degrees on the assembly. If you pair this single pedal assembly with Empi’s other single pedal with dual master cylinders, it will give you a complete versatile pedal package that is totally custom for the way you like it!
Empi Single Pedal / Dual 3/4″ x 7/8″ Master Cylinder
Empi Single Pedal / Dual 7/8″ x 7/8″ Master Cylinder